User's Manual

Web Configuration FIP16 User Manual
59
TR069
seconds
Forced Resync Delay(sec)
If the time to re-sync, but ATA is busy, in this case, ATA will wait for
some time, the longest is the "forced resynchronization delay", the
default is 14400s, after time, ATA will be forced to re-sync
Resync After Upgrade
After re-synchronization, whether to enable the firmware update
function, the default is enable
Resync From SIP
Whether to enable resynchronization from SIP
Option 66
It is only used in the company within the provisions of the model.
When using TFTP with option 66 to implement the configuration, the
user must enter the correct profile name on the ATA web page. When
option 66 is disabled, this parameter does not work
Option 67
Whether to enable Option 67
Config File Name
Configuration file name
User Agent
Set the user agent
Profile Rule
The URL of the configuration file
Upgrade Enable
Note that the specified file path is relative to the root directory of the
TFTP server
Upgrade Error Retry Delay(sec)
Turn on or off
Upgrade Rule
Set the upgrade error retry delay interval, the default 3600 seconds
Parameters name
Description
TR069 Enable
Whether TR069 is enabled
CWMP
Whether CWMP is enabled
ACS URL
TR069 the server's URL, the default for the Fahrenheit ACS server address
User Name
The user name for the TR069 server connection
Password
The password for the TR069 server connection
Periodic Inform Enable
Whether to enable periodic information
Periodic Inform Interval
TR069 The interval at which the server sends information