User's Manual

Web Configuration FIP16 User Manual

Remotely:

Step 1. Enable remote system log enable and enter the IP address in Remote Syslog Server, as shown in Figure 2.

Step 2. Select a log level.

Step 3. Press the Save Settings button to save and press the Restart button to apply the settings.

Step 4. The user can view the syslog server's system log and also view the records of the Status / Syslog web

pages.

Factory Defaults Setting

Click the Factory Default button to reset the phone to factory settings.

Firmware Management

Step 1. Select an upgrade file type for the upgrade software.

Step 2. Press Browse to select the upgrade file.

Step 3. Press to start the upgrade and the LCD will show the prompts that are being upgraded.

Step 4. Log in to the phone page by checking the status of the firmware in the firmware version of the firmware

upgrade to determine whether the upgrade is successful.