User's Manual

LCD Configuration FIP16 User Manual

Step 2. Enable MWI and fill in the Voice Mail Number.

Step 3. Use the ‘Save&Apply’ / ‘Save’ button to save your changes for the configuration to take effect.

How to Use:

Step 1. When there is a voice message, the LED in the upper right corner of the phone will flash.

Step 2. Press voice mail button to enter the mailbox

Step 3. Also you can use ‘Voice Mail Number’: phone goes off-hook and dials the Voice Mail Number.

Step 4. After entering the voicemail box, there will be a voice prompting how to operate. The user can listen to

new voicemail or old voicemail or reply to voice mail based on voice prompts.