User's Manual

LCD Configuration FIP16 User Manual

Step 1. Log in to the web page and switch to the ‘VoIP-Line ’ Configuration page.

Step 2. There is a call waiting conifiguration item in the ‘Supplementary Service Subscription’ on this page.

Step 3. At position 1, you can configure whether to enable the call waiting function.

How to Use:

Step 1. The A phone call waiting function is configured.

Step 2. C calls A When A is connectting with B.

Step 3. A phone LED flashes, there will be a tone in the handle (prompted a new call), the screen will display a

new call.

Step 4. When prompted with a new call, use the appropriate line key or hold button to answer the new

call C and hold the call with B.

Step 5. When there is a new call, A ends the call with B, and C is still calling A, then ringing, picking up and

talking to C.

Step 6. If the call waiting function is off, then after C dials A, it will prompt the call to fail and have a busy tone.

Auto Answer