User's Manual

LCD Configuration FIP16 User Manual
17
Step 2. There is a call item in the middle of the page.
Step 3. Enable the no answer forward at position 1 and fill destination number at position 2.Potion 3 is no
answer to the forward time, default 20s.
Step 4. At the bottom of the page, click ‘Save’ / ‘Save&Apply’, and the configuration is complete.
How to use:
Step 1. The A handset assumes that no forwarding is configured and the destination number is the C telephone.
Step 2. B Telephone Calls a telephone.
Step 3. A phone rings, but nobody answers.
Step 4. After 20 seconds, the handset stops ringing and the C phone rings and goes off-hook with B.
Call Waiting
Functional Description:
Call waiting function: During the call, if a third party calls, the phone has a prompt, and the third party phone has
been ring back tone.
From LCD:
Step 1. Press Menu button.
Step 2. Use the ▲ and ▼ navigation keys to the Setting- Perference settings and select the 2.call waiting.
Step 3. Fill the relevant configuration according to LCD instructions:whether to enable call waiting.
From Web page: