User's Manual

LCD Configuration FIP16 User Manual

There are two ways to register a SIP account: register from the LCD and register from the web page

From the LCD:

Step 1. Press Menu.

Step 2. Use the ▲ and ▼ navigation keys to Setting--Account, you need to enter the login password.

Step 3. Select the line to register and fill in the relevant configuration as indicated by the LCD

Step 4. Use the soft key from to "save" the current configuration.

Step 5. Check the registration of the corresponding line on the display.

From the web page:

Step 1. Log in to the web page. Please refer to section 4.1 for details.

Step 2. Switch to the SIP Account configuration page.

Step 3. The account enable is set to "On" and the line can be used after opening.

Step 4. The registration server fills in the IP address of the SIP server.

Step 5. Display Name Fill in the content is the name of the number displayed on the LCD.

Step 6. The registration account is filled with the account provided by the SIP server.

Step 7. The name of the authentication is the SIP account provided by the SIP server.

Step 8. The password is filled with the password provided by the SIP server registration account.

Step 9. When you are finished, click the Save button at the bottom of the page to make the configuration take

effect.

Step 10. Check the registration of the corresponding line on the display / web status page.

SIP registration