User Manual

3
Image: Lower / Bottom Side
The software setup side is reduced as far as we could, many things are already taken into account for you, if
you have some solid soldering skills you should be able to build your quad pretty quick.
A known feature is also the telemetry, in combination with our 32bit ESC line it‘s possible to show the live
telemetry data via OSD on your FPV live feed or in the KISS FC GUI.
This way you get useful informations like the Voltage of your battery, current consumption, ESC temperature
and motor RPM.
Other FC firmwares (eg. Betaflight) are ported for the use with the KISS FC V2.
NOTE: its recommended to keep the FC level and firm for at least 5 seconds after you powered it!
If you move it, the gyro calibration might take longer and fails, indicated by the blue LED staying solid.
On startup the green LED should be lit and the blue one should be flashing for several seconds, then go solid
for a second and if the calibration is complete go off.