User Manual

7. If you have all serial numbers, go to http://ultraesc.de/hexGen/index.php, enter your serial
numbers and press “get hexfile”
8. You will get a hex file that will work on the ESC's with the entered serial numbers.
9. Download and install http://www.st.com/web/en/catalog/tools/PF257525
10. Connect one ESC to the USB UART and close its boot jumper (BT on the bottom side) before
you power it. then flash the new hex file (if the demonstrator doesn’t find the 32k stm32f051
variant automatically, please select it manually [dropdown])
11. open the boot jumper and you are done
Flyduino, Paul Bake
Süderfeldstr. 54
22529 Hamburg
Email: [e-mail]