User Manual

• Never start a brushless motor in your hands!
• While starting up with propellers mounted, always care for distance yourself and
objects
• Never power up your ESC/speed controllers without a valid signal transmitter
(receiver or FC) is connected.
• The KISS ESC can be locally heated up to 80 ° C during operation!
• While soldering do not connect a voltage source at the ESC / speed controller.
• Some components on the KISS ESC can be destroyed by static charge. When
handeling such electronics, make sure to be grounded.
Description/Components:
1. Solder contacts for motor-phase connections
2. LiPo Power supply GND -
3. LiPo Power supply +
4. PWM signal input (servo signal)
5. PWM signal GND (ground reference)
6. Solder jumper, to set the direction of rotation (also in 3D mode)
7. Telemetry (e.g. On the KISS FC connected to TRX)
8. Status LED (indicates validity of the input signal)