Datasheet

2
Safety: IEC/EN 61010-031:2008
UL 61010B-031
CSA C22.2 No. 1010.2.031
Working Voltage: 1000V CAT III / 600V CAT IV
Each probe set includes: * Probe assembly (main item),
* Hook clip for probe tip (black),
* Insulation sleeve for probe tip (black),
* Reference lead with mini alligator clip (black),
* Ground spring (black).
NOTE: Always apply either the insulation sleeve or the hook clip
over the probe tip, when using the ground lead!
Specification valid when used with Fluke 190-Series II ScopeMeter
test tool (see note)
Note: the specification and the voltage rating of these probes are optimized
for use with the 190-series-II instruments.
These probes may also be used with the Fluke 190C-series and with earlier
ScopeMeter models, however special care should be taken when it comes to
the overall specification of such combination.
The overall rating is determined by the part that has the lowest rating ('the
weakest link').
VPS410-x VPS410-II-x
Specification valid when
probe is used with model:
190-series-II 190-50x
Voltage attenuation: 10:1 10:1
Bandwidth: 300 MHz 500 MHz
Maximum input voltage: CAT III 1000V / CAT IV 600V
Maximum Voltage to
groun
d
:
CAT III 1000V / CAT IV 600V
Input Resistance: 10 MOhm
Input Capacitance: 12 pF nom. 11.5 pF nom.
Compensation Range: 10 ~ 22 pF
Cable length: 1.2m (3.9 ft)
VPS410-B Blue
VPS410-G Grey
Fluke item# 3894718
Fluke item# 3894729
VPS410-V Green
VPS410-II
-R
Red
VPS410-II
-B
Blue
VPS410-II
-G
Grey
Fluke item# 3894734
Fluke item# 4276928
Fluke item# 4276937
Fluke item# 4276943
VPS410-II
-V
Green Fluke item# 4276955
Models and Colors available
VPS410-R Red Fluke item# 3894707