Cut Sheet

2 Fluke Corporation Fluke T+ and T+PRO Electrical Testers
Specifications
Temperature
Operating -10 °C to 55 °C (14 °F to 131 °F)
Storage
-30 °C to 60 °C (-22 °F to 140 °F)
Relative humidity 0 °C to 30 °C (32 °F to 86 °F): 90 %
30 °C to 40 °C (86 °F to 104 °F): 75 %
40 °C to 50 °C (104 °F to 122 °F): 45 %
Altitude
Operating 2,000 m (approx. 6,561.6 ft)
Storage 10,000 m (approx. 32,808.4 ft)
Battery type/life AAA (2); 40 hours
Shock, vibration Sinusoidal vibration per MIL-PRF-28800F for a Class 2 instrument
Safety ISA-82.02.01 (IEC 61010-1 Mod) Second Edition, CAN/CSA-C22.2 No. 61010-1
Second Edition, IEC 61010 - 1 to 1000 V CAT III/600 V CAT IV
Compliance to NFPA 70E
1
AC Bandwidth 45 Hz to 66 Hz
Maximum working voltage 1000 V ac/dc
Maximum measurable voltage 600 V ac/dc
Duty cycle Indefinitely for voltages up to 240 V.
For voltages between 240 V and 600 V the duty cycle is 30 s on / 300 s off.
For voltages above 240 V the tester must connect to a voltage source only for a
MAXIMUM of 30 s and then disconnect for a MINIMUM of 300 s.
Features and Benefits contd.
•
Replaceable test probes for added flexibility and
convenience
•
Convenient probe storage on the back
•
Probe holder for easier testing
•
Hazardous voltage warning light for added user
protection
•
Test lead strap included for better test lead
management
•
AC/DC Voltage: 12 V – 600 V on LED bar, 10.2 V
– 600 V on LCD (LCD on T+PRO only)
•
Auto-off saves battery power
•
2-year warranty
Added functionality available only
on the T+PRO
•
Backlit LCD display for easier viewing
•
Display resolution of 0.1 V, ideal for
troubleshooting low-voltage lighting
•
Resistance (Ohms) to 9.99 kOhms
•
Rotary Field Indication
•
Display Hold for easier viewing in hard-to-test
areas
1
When used properly per Article 110.9 Use of Equipment (A) Test Instruments and Equipment.