Datasheet

SW90W Users Manual
3
Connecting the ScopeMeter Test Tool
The FlukeView software communicates with your ScopeMeter
test tool via the optically isolated RS-232 adapter/cable (see
Appendix) connected to a COM port of the PC.
During startup (except for the first time), the FlukeView software
automatically tries to make a connection with the instrument
according to the last valid connection.
If automatic connection is not successful, the dialog box shown
below appears, allowing you to make a connection.
1 Select the Com Port that connects the instrument to the
PC.
2 Click Connect to establish a connection with the
instrument.