Datasheet

1-800-283-5853 (US and Canada) • www.flukenetworks.com
62 63
990DSL CopperPro
™
Loop Tester
The CopperPro loop tester offers a broad range of Plain Old Telephone Services (POTS) troubleshooting,
fault location and line qualification capabilities in an affordable package. Its Wideband/TDR option
adds high-frequency transmission testing and qualification functions for services like ADSL, HDSL and
HDSL2, ISDN, T1, E1 and DDS. And the TDR option adds precise fault location and analysis. CopperPro
is packed with test, analysis and troubleshooting capabilities integrated with an easy-to-use toolbox
interface that makes identifying and locating faults as simple as pushing a button.
• Replaces up to 12 traditional test sets
• Troubleshoots and qualifies lines for POTS, ADSL and other special services
• Time Domain Reflectometer (TDR) feature allows precision fault locations
Model Description Gold 1YR
990 DSL CopperPro Loop tester GLD-990DSL
990DSLWT Loop tester with wideband and TDR N/A
990TL-SB Test lead set (Spike and bed-of-nails) N/A
990-CASE Deluxe transport bag N/A
To learn more visit: www.flukenetworks.com/990
CopperPro Terminator
™
Far End Terminating Device
The CopperPro family of loop testers packs a full complement of test and troubleshooting capabilities
into one rugged, integrated tool for OSP technicians. You can expand those capabilities even further
with Terminator—an accessory module to the 990DSL CopperPro that lets you perform terminated trans-
mission testing quickly, easily, single-handedly. Together, the CopperPro and Terminator are a major
advance in qualifying and troubleshooting copper access network circuits, including HDSL2/4. Nothing
else on the market offers a more complete and effective solution for reducing failure frequency, repeats,
and chronic problems with special services circuits.
• Perform terminated transmission testing quickly, easily, single-handedly
• Optimize your workforce with “one tech out” terminated testing of out-of-service pairs
• High-speed acceptance/qualification tests, including loop attenuation—a must for HDSL2/4
• Robust error checking eliminates time-consuming false starts and assures reliable communication
with the 990DSL CopperPro test set
• Sweep thousands of frequencies in seconds
Model Description
TN2100 Enhanced Terminator far end device
TN-LEADS-B Test lead set, bed-of-nail clip
To learn more visit: www.flukenetworks.com/terminator
635 QuickBERT-T1 Test Set
Compact, handheld T1 test set for construction, installation and troubleshooting applications.
Instantaneous detection and display of framing, line coding, errors, alarms, level, frequency and more.
In a single 4 lb (1.8 kg) package, the 635 includes all the basic T1 testing capabilities you would
expect in a larger and more expensive tester. It performs bit-error tests, detects framing type, line
coding and bit pattern, and displays signal level, frequency, clock slips, errors and alarms. The 635
transmits the most commonly used loop codes, including HDSL. Full, unframed and fractional
(56k and 64k) T1 are supported, along with display of signaling and data bits and capture of DTMF
digits. Plus, individual voice channels may be monitored on the built-in speaker or over a headset.
• Instantaneous detection and display of framing, line coding, errors, alarms, level, frequency
and more
• Transmits and receives common Bit Error Rate Test (BERT) patterns and includes all common
loop codes
• Compact, rugged and easy-to-use
Model Description
635
QuickBERT-T1, carrying case, ToolPak™ hanging accessory, and necessary cables
and adapters
633/635-Kit 2 Bantam-to-310 cables, 2 Bantam-to-alligator clip cables, 1 Bantam-to-RJ-48 cable
635-1 635 QuickBERT-T1 and cable kit
To learn more visit: www.flukenetworks.com/quickbert
Voltage Detector
In just a few seconds, a technician can determine if it’s safe to work around areas such as transformer
cases and circuit breaker housings, power ground wires or newly-driven ground rods, mobile homes,
metallic siding or metal framing, pedestals, cross boxes or conduit, street light fixtures or electrical
machinery. The Voltage Detector is a proven life-saver, with more than 30 years of service in telecom-
munications outside plant and power utility applications.
• Helps protect against accidental electrocution
• Is fast and easy-to-use. Handy as a flashlight
• Rated to 20,000 Vac and 2,000 Vdc
Model Description
C9970 Voltage Detector
C9973
Voltage Detector kit—includes Voltage Detector, probe cap, storage bag, temporary bond,
ground cord and handbook
C9974 Voltage Detector kit with test plug
To learn more visit: www.flukenetworks.com/voltagedetector
Access Network Test Equipment
Access Network Test Equipment
www.flukenetworks.com/telecom