Datasheet

1-800-283-5853 (US and Canada) • www.flukenetworks.com
32 33
D914
™
Impact Tool
The D914 Impact Tool is the only punchdown tool to combine
torque and impact. It combines two versatile tools, the hook
and spudger, into the handle. 66/110 blades available.
• Ensures clean, smooth terminations ready for optical
transmission
• Industry standard, internationally accepted with lifetime
warranty
• Hook and spudger tools are built into the handle
• Automatic spring handle—choose low impact for 24/26 gauge
wire or high impact for 22-gauge wire
• Accept Phillips-head or flat screwdriver blade
To learn more visit: www.flukenetworks.com/d914
D814
™
Impact Tool
The D814 Impact Tool is a deluxe, all-in-one, telecom punchdown
tool and comes with the 66/110 blade. Impact wheel has high
and low settings. Automatic spring mechanism provides the right
impact to seat and/or terminate wires.
• Industry standard with lifetime warranty
• Accepts standard industry blades
• Lightweight and easy-to-use
• Adjustable spring impact mechanism allows low impact for
24/26 gauge wire or high impact for 22-gauge wire
To learn more visit: www.flukenetworks.com/d814
D-Impactor
™
5-Pair Impact Tool
The D-Impactor 5-pair impact tool easily cuts and terminates five
copper pairs on a 110 block. This rugged, easy-to-use tool saves
time and minimizes hand stress. The patented individually molded
blades eliminate the chance of metallic shorts ensuring optimal
performance of your network. Lifetime warranty.
• Single reversible blade part
• Ease of use and reversing of cutting blade
• Fewer moving parts allow for smoother push down, less hand stress
To learn more visit: www.flukenetworks.com/dimpactor
D914
™
S Impact Tool
SoftTouch D914S Impact Tool offers a new ergonomic design with
a soft rubber handle for better grip and rounded edges to absorb
more of the impact recoil. Includes built-in probe pic/spudger and
torque, allowing you to choose from high-and low-impact settings.
• Industry standard, internationally accepted with
lifetime warranty
• Hook and spudger tools are built into the handle
• Automatic spring handle—choose low impact for 24/26 gauge
wire or high impact for 22-gauge wire
• Accepts Phillips-head or flat screwdriver blade
To learn more visit: www.flukenetworks.com/d914
JackRapid
™
Termination Tool
The JackRapid termination tool is the industry’s most innovative and time-saving installation tool.
JackRapid allows you to terminate jacks eight times faster than traditional impact tools—with accuracy
that’s unmatched. The patented jack termination tool seats and terminates all wires simultaneously
with one squeeze of an ergonomic handle. The built-in blade cuts off the excess wire after it is seated
in the connector, eliminating the need for a secondary trim step. Simple, one-handed operation reduces
hand fatigue. With JackRapid, you’ll never punch into the palm of your hand or through drywall again.
• Cuts installation time—easy-to-use handle, seats and cuts all wires at once, saving you up to two
minutes installation time per jack
• High-quality, consistent terminations—no more compromised connections and wasted jacks
• Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
Model Description
JR-LEV-1 JackRapid termination tool (for Leviton 41106, 41108, 5G108)
JR-LEV-1-H JackRapid replacement blade head (for Leviton 41106, 41108, 5G108)
JR-SYS-UNI-1 JackRapid termination tool (for Systimax MPS100E, C5,M1BH and Uniprise UNJ600/500/300)
JR-SYS-UNI-1-H JackRapid replacement blade head (for Systimax MPS100E, C5, M1BH and Uniprise UNJ600/500/300)
JR-LEV-2 JackRapid termination tool (for Leviton 61110, 5G110, 6110G)
JR-LEV-2-H JackRapid replacement blade head (for Leviton 61110, 5G110, 6110G)
JR-SYS-2 JackRapid termination tool (for Systimax MGS400, MGS500, MFP420, MFP520)
JR-SYS-2-H JackRapid replacement blade head (for Systimax MGS400,MGS500, MFP420, MFP520)
JR-ORT-2 JackRapid termination tool (for Ortronics TJ5E00, TJ600, TJ610)
JR-ORT-2-H JackRapid replacement blade head (for Ortronics TJ5E00,TJ600, TJ610)
JR-ADC-2 JackRapid termination tool (for ADC KM8, Copper Ten®)
JR-ADC-2-H JackRapid replacement blade head (for ADC KM8, Copper Ten)
JR-ERGOHANDLE JackRapid ergonomic handle
JR-PAN-2 JackRapid termination tool (for Panduit NK688M)
JR-PAN-2-H JackRapid replacement blade head (for Panduit NK688M)
Test Tools and Kits
Test Tools and Kits
To learn more visit: www.flukenetworks.com/jackrapid
Get accurate terminations and clean, consistent cuts every time with the JackRapid Termination Tool.
6. Wires will be seated and cut for
a solid termination.
1. Strip cable jacket with a standard cable
stripper or the built-in cable stripper.
2. Determine wiring scheme. Dress
all four pairs (eight wires).
3. Insert jack in JackRapid front first with
IDC slots facing blades of JackRapid.
4. Ensure jack is completely and securely
inserted in jack holder bed with IDC
slots facing the blades.
5. Pull trigger completely and remove
excess wire prior to releasing trigger.
Model Description
10051000 D914 Impact Tool
10051100 Tool with EverSharp 66 blade
10051110 Tool with EverSharp 110 blade
10051120
Tool with EverSharp 110 and
EverSharp 66 blade
10051501
Tool with EverSharp 110,
EverSharp 66 blade and free
screwdriver blade
Model Description
10061000 D914S Impact Tool
10061100 Tool with EverSharp 66 blade
10061110 Tool with EverSharp 110 blade
10061501
Tool with EverSharp 110,
EverSharp 66 blade and
free screwdriver blade
10061503
Tool with BIX and EverSharp
66/110 cut blade
10061810
Tool with EverSharp 66/110
blade
Model Description
10059000
D-Impactor
(five-pair 110 impact tool)
10059030 D-Impactor replacement blade
Model Description
10054000 D814 Impact Tool
10055000 Tool with EverSharp 66 blade
10055110 Tool with EverSharp 110 blade
10055200
Tool with EverSharp 110 and
EverSharp 66 blade
10055501
Tool with EverSharp 110,
EverSharp 66 blade and free
Wood Screw Starter Punch
blade
10055503
Tool with BIX and Eversharp
66/110 cut blade
www.flukenetworks.com/telecom