Datasheet
1-800-283-5853 (US and Canada) • www.flukenetworks.com
28 29
FI-7000 FiberInspector
™
Pro
End-face contamination is a leading cause of fiber failures. Dirt and contaminant cause insertion loss
and back-reflection that inhibits optical transmission and causes havoc with transceivers. Fiber loss
and OTDR testing can expose this problem, but in many cases, dirty connections make fiber testing time
consuming and inaccurate.
Since dirt can be an issue before, during, or after fiber optic certification testing, and migrate from one
end-face to another upon mating, both sides of any connection must always be cleaned and inspected.
Further, mating contaminated connectors can cause permanent damage as microscopic debris is crushed
between end-faces in physical contact. Even factory terminated patch cords or pigtails must be in-
spected as protective caps do not keep end-faces clean. Avoiding this common cause of failure, starts
with inspecting the end-face and eliminating any contamination before insertion into a bulkhead or
piece of equipment.
The FI-7000 FiberInspector Pro allows you to inspect and certify end-faces in 2 seconds so you can
get the job done the first time. Automated PASS/FAIL certification take the guess work out of fiber
inspection so anyone can be a fiber expert.
• Automated Pass/Fail certification of fiber end-faces
• Graphical indication of problem areas due to contamination, pits, chips, and scratches
• Certify to industry standards—IEC 61300-3-35
• Eliminate human subjectivity from end-face measurements
Fiber Inspection and Cleaning
Model Description Gold 1YR Gold 3YR
FI-7000 FiberInspector Pro GLD-FI-7000 GLD3-FI-7000
FI-7000-MPO FiberInspector Pro w/MFO and cleaning GLD-FI-7000-MPO GLD3-FI-7000-MPO
FI-1000-KIT
FI-1000 USB Fiber Inspection Video Probe with selective bulkhead and
video probe tips.
GLD-FI —
FI-1000 FI-1000 FiberInspector USB video probe for Versiv platform. GLD-FI —
Accessories
Model Description
FI1000-SCFC-TIP SC and FC bulkhead video probe tip
FI1000-LC-TIP LC bulkhead video probe tip
FI1000-ST-TIP ST bulkhead video probe tip
FI1000-MU-TIP MU bulkhead video probe tip
FI1000-E2KAPC-TIP E2000/APC bulkhead video probe tip
FI1000-SCAPC-TIP SC/APC bulkhead video probe tip
FI1000-E2K-TIP E2000 bulkhead video probe tip
FI1000-LCAPC-TIP LC/APC bulkhead video probe tip
FI1000-2.5-UTIP 2.5 mm universal video probe tip for patch cords
FI1000-1.25-UTIP 1.25 mm universal video probe tip for patch cords
FI1000-2.5APC-UTIP 2.5 mm APC universal video probe tip for patch cord
FI1000-MPO-UTIP MPO probe tip and translator knob for patch cords and bulkheads
FI1000-MPOAPC-UTIP MPO/APC probe tip and translator knob for patch cords and bulkheads
FI1000-1.25APC-TIP 1.25 mm APC universal video probe tip for patch cords
FI1000-MPOAPC-RT MPO/MTP APC replacement tip with no translator knob
FI1000-MPO-RT MPO/MTP replacement tip with no translator knob
Model Description
FT120 FiberViewer, 200X
FT140 FiberViewer, 400X
NF350 1.25 mm universal microscope adapter
Model Description Gold 1YR
FT500
FiberInspector
Mini Video
Microscope
GLD-FTINSPECTOR
FT525
FiberInspector
Mini and
Cleaning Kit
GLD-FTINSPECTOR
Model Description
VisiFault
VisiFault Visual Fault Locator with
2.5 mm universal adapter
NF380 1.25 mm Universal VisiFault Adpater
FiberInspector
™
Mini Video Microscope
The FiberInspector Mini video microscope enables
The portable video microscope projects a crisp, clear
image of microscopic debris and end-face damage.
• The exceptionally convenient FiberInspector Mini
uses a 200x magnification probe sufficient for
inspecting both multimode and singlemode fiber
• Quickly determines whether fiber connectors on a
hardware device are clean and in good condition without disassembling the device
Accesorries
Model Description
NFM110 Accessory tip set for FiberInspector Mini
NF390 APC (Angled Physical Connector) video adapter probe for FiberInspector Mini
NFM120 Rechargeable battery for FiberInspector Mini (NIMH) for FiberInspector Mini
To learn more visit: www.flukenetworks.com/fiberinspectormini
FiberViewer
™
Fiber Microscope
The FiberViewer fiber microscope ensures a termina-
tion is clean and ready for optical transmission. •
FT120 offers 200X magnification, FT140 offers 400X
magnification
To learn more visit: www.flukenetworks.com/
fiberviewer
VisiFault
™
Visual Fault Locator
The laser-powered VisiFault
™
Visual Fault Locator (VFL)
traces fibers, verifies continuity and polarity, and helps
find breaks in cables, connectors and splices.
Continuous and flashing modes for easier identifica-
tion. Compatible with 2.5 mm and 1.25 mm connectors
for easy connection.
• Bright red visible laser light source, features continuous and flashing modes
• Accelerates end-to-end fiber continuity checks
• Speeds fiber tracing and identification
• Aids in location of fiber faults including tight bends, breaks and bad connectors
To learn more visit: www.flukenetworks.com/visifault
www.flukenetworks.com/fiberinspection
Fiber Testing, Troubleshooting and Certification
Fiber Testing, Troubleshooting and Certification