Datasheet

Fluke. Keeping your world
up and running.
Small sized, convenient to use current clamps
The i200 is a single range 200A clamp-
on AC Current Clamp with current out-
put via safety shrouded banana plugs.
The i200 is compatible with any Fluke
multimeter or any other current measure-
ment device, which has banana inputs.
The i200s is a dual range 20A and 200A
clamp-on AC Current Clamp with voltage
output via a safety insulated BNC con-
nector. A dual banana to BNC adapter is
supplied to allow the i200s to be con-
nected to multimeters with banana input.
i200
•
Measuring 0.5 to 240A
•
The output signal is 1 mA/A
•
Safety shrouded banana plugs for
usage with DMMs or any other current
measuring device which has banana
inputs
i200s
•
Measuring range 0.1 to 24A and 0.5
to 240A
•
The output signal is 100 mV/A in the
20A range and 10 mV/A in the 200A
range
•
Includes BNC connector making it
suitable for use with any oscilloscope,
power analyzer or ScopeMeter
®
test
tool having a compatible BNC input
connector
•
Dual banana to BNC adapter is
included for use with DMMs
i200 and i200s
•
Maximum current 240A AC
•
40 Hz to 10 kHz frequency response
•
Jaw opening 21 mm
•
Maximum conductor size ø 20 mm or
busbar 20 x 5 mm
•
EN61010, CAT III 600V
•
One year warranty
i200/i200s AC Current Clamps
®
!
!
!
!
Ordering Information
i200 AC Current Clamp
i200s AC Current Clamp
Need Technical Assistance? Call:
Fluke Corporation
P.O. Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
P.O. Box 1186
5602 BD, Eindhoven
The Netherlands
For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East [phone] or
Fax [phone]
In Canada [phone] or
Fax [phone]
From other countries [phone] or
Fax [phone]
E-mail: [e-mail]
Web access: http://www.fluke.com/nettools
© Copyright 1998 Fluke Corporation. All rights
reserved. Printed in the Netherlands 12/98.
C0209 EEN Rev A.