Datasheet

®
8845A/8846A
Digital Multimeters
Safety Information
Safety Information
This safety information should be observed when using the 8845A or 8846A (hereafter the Meter) Digital
Multimeters.
A XW
Warning statement identifies conditions or practices that could result in injury or death.
A W
Caution statement identifies conditions or practices that could result in damage to the Meter or equipment to
which it is connected.
XW Warning
To avoid electric shock, personal injury, or death, carefully read the information
in this safety sheet before attempting to install, use, or service the Meter.
Symbols
Table 1 is a list of safety and electrical symbols that appear on the Meter or in its manuals.
Table 1. Safety and Electrical Symbols
Symbol Description Symbol Description
W
Risk of danger. Important
information. See manual
O
Display ON / OFF
X
Hazardous voltage. Voltage > 30 V
dc or ac peak might be present
J
Earth ground
B
AC (Alternating Current)
E
Capacitance
F
DC (Direct Current)
G
Diode
I
Fuse
D
or
C
AC or DC (Alternating or Direct
Current)
Y
Digital signal
R
Continuity test or continuity beeper
tone
U
Maintenance or Service
Y
Potentially hazardous voltage
CAT II
IEC 61010 Overvoltage (installation or
measurement) Category 2.
T
Double insulated
<
Recycle
h
Static awareness. Static discharge
can damage part(s)
~
Do not dispose of this product as unsorted
municipal waste. Contact Fluke or a qualified
recycler for disposal
PN 2741870 August 2006 ©2006 Fluke Corporation. All rights reserved. Printed in U.S.A. 1