User Manual

Operating the Meter from the Front Panel
Introduction 3
3-5
Table 3-1. Front-Panel Features (cont.)
No. Name Description
+ 8 Primary operation: Sets the Meter’s measurement rate to slow,
medium or fast
Second level operation: Selects source for triggering
measurement
, 7 Primary operation: Selects Touch Hold function
Second level operation: Sets Touch Hold minimum response
level
- B Primary operation: Selects relative readings function to display
difference between relative base and input
Second level operation: Sets relative base
. E Primary operation: Selects dB measurement mode
Second level operation: sets dB reference impedance
/ < Stores the minimum and maximum inputs measured
0
4
2
/
3
0
=
5
Selects measurement function:
Frequency
DC voltage
AC voltage
DC current
AC current
Resistance (ohms)
Continuity / diode test (toggles)
1 @ Toggles between manual and autorange modes
Cand D increase and decrease the range for manual
ranging
2 10 A Input terminal for 10 A ac and dc current measurement
3 mA Input terminal for 200 mA ac and dc current measurement