User Manual

Automotive Multimeter
The Meter's Features
11
Table 6. Display Features
ayg04f.eps
Number Feature
Indication
Polarity indicator for the
analog bar graph.
#
TrigG"
Positive or negative slope
indicator for Hz/duty cycle
triggering, pulse width, RPM.
$" F"
The continuity beeper is on.
%" E
Relative (REL) mode is active.
Number Feature
Indication
&" I"
Smoothing is active.
'" -
Indicates negative readings. In
relative mode, this sign
indicates that the present input
is less than the stored
reference.
(" H
Indicates the presence of a
high voltage input. Appears if
the input voltage is 30 V or
greater (ac or dc). Also
appears in cal, Hz, and duty
cycle modes.
)"
@A"
AutoHOLD is active.
*"
A"
Display Hold is active.
+" U"
Indicates the Meter is in Peak
Min Max mode and the
response time is 250 µs.
,"
"R""
MAX MIN AVG"
Indicators for minimum-
maximum recording mode.
-" J"
The battery is low.
ZYWarning: To avoid false
readings, which could lead to
possible electric shock or
personal injury, replace the
battery as soon as the battery
indicator appears.