User Manual

714 English Instruction Sheet
Page 4
Safety Information
W Warning
To avoid possible electric shock or personal injury:
• Never apply more than 30 V between the TC
terminals, or between either TC terminal and
earth ground.
• Make sure the battery door is closed and
latched before you operate the calibrator.
• Remove an attached thermocouple miniplug
from the calibrator before you open the battery
door.
• Do not operate the calibrator if it is damaged.
• Do not operate the calibrator around explosive
gas, vapor, or dust.
When servicing the calibrator, use only specified replacement
parts.
Turning the Calibrator On
Press the green O pushbutton to turn the calibrator on and off.