Brochure

Fluke 725Ex Multifunction
Process Calibrator
Best suited for:
•
Calibrating virtually any process parameter
Features:
•
Class I Div 1 Groups B-D 171 °C
•
ATEX II IG EEx ia IIB 171 °C Compliant
•
Measure, source or simulate volts dc, mA, RTDs, thermocouples,
frequency and ohms
•
2-channel simultaneous source and measure capability for
calibration of transmitters
•
Internal loop supply to power transmitters
•
Store frequently-used test setups for later use
•
Pressure measurement to 200 bar and pressure switch test using any of
the 8 Fluke 700PEx pressure modules
Fluke 700PEx
Pressure Modules
Best suited for:
•
Use with the Fluke 725Ex Multifunctional
Process Calibrator and Fluke 718Ex
Pressure Calibrator to cover the most
commonly used pressure calibration
ranges from 0-25 mbar and 0-200 bar
Features:
•
I.S. Class I Div 1 Groups A-D T4,
Ta = 0 °C to +50 °C
•
ATEX II 1G EEx ia IIC T4 compliant
•
Very high accuracy up to 0.025 %
Fluke 68 Intrinsically Safe
Infrared Thermometer
Best suited for:
•
Taking spot, differential or scanning temperature measurements in
any environment where flammable gases or vapors may be present.
Features:
•
Enhanced optics (distance to spot ratio up to 50:1) allow the user to
measure smaller objects from farther away
•
Factory Mutual (a U.S. organization) approved as an Intrinsically Safe
device (Class I, Division 1)
(Customers outside of the United States should check with their national and company
regulations to see if which approvals are acceptable for their application.)
•
Comfortable pistol grip make target pointing and easy job
•
Backlit display for poorly lit areas
•
Displays Min/Max measurements and saves readings in memory
•
Adjustable emissivity setting for more accurate measurements
•
Log up to 12 measurements
•
RTD contact probe
Fluke 707Ex Loop Calibrator
Best suited for:
•
Calibration and maintenance of 4 to 20 mA control loop
Features:
•
F.M. Class I Div 2 Groups A-D T4
•
ATEX II 2G EEx ia IIC T4 compliant
•
Large display and simple, quick-click push/rotary
button for easy one-handed operation
•
Simultaneous mA and % readout for quick,
easy interpretation of readings
•
mA accuracy of 0.015 %, superior to other loop calibrators
•
Pushbutton with 25 % steps for fast, easy linearity checks
•
0 and 100 % ‘span check’ for fast confirmation of zero and span
Legend
Motor Control Center Process Measurements
Flow Computer Process Controller
Tank Farm Pumping Station
For more information on these ATEX-compliant tools designed for tough process maintenance and calibration tasks, visit www.fluke.com/ex
Fluke Intrinsically Safe products
to help keep your employees safe
Fluke 87VEx Industrial
Best suited for:
•
Solving problems on motor drives, in plant
automation, power distribution and electro-
mechanical equipment
Features:
•
Measure accurate voltage and frequency
measurements on adjustable speed motor
drives and other electrically noisy equip
-
ment
•
Built-in thermometer allows you to take
temperature readings
•
Optional magnetic hanger for easy set-up
and viewing while freeing your hands for
other tasks
•
Large digit display with bright, two-level
backlight
Best suited for:
•
Pressure measurements and calibration in pressure ranges
up to 200 bar
Features:
•
Class I Div 1 Groups A-D T4 Compliant
•
ATEX II IG EEx ia IIC T4 compliant
•
Built-in pressure/vacuum hand pump, with vernier and
bleed valve
•
Pressure measurement to 200 bar using any of the 8 Fluke
700PEx Pressure Modules
•
Pressure measurement to 0.05 % of full span using internal
pressure sensor
•
Pressure switch test function
“Intrinsically Safe” or I.S. is a
protection method employed
in potentially explosive atmo-
spheres. Certified I.S. tools are
designed to prevent the release
of sufficient energy to cause
ignition of flammable mate-
rial. I.S. standards apply to all
equipment that can create one
or more of a range of defined
potential explosion sources:
•
Electrical sparks
•
Electrical arcs
•
Flames
•
Hot surfaces
•
Static electricity
•
Electromagnetic radiation
•
Chemical reactions
•
Mechanical impact
•
Mechanical friction
•
Compression ignition
•
Acoustic energy
•
Ionizing radiation
Industries that use or should
use I.S. tools include:
•
Petro-chemical
•
Oil platforms and refineries
•
Pharmaceutical
•
Pipelines
•
Any environment where
explosive gases or vapors
could be present