User Manual

414D/419D/424D
Users Manual
20
Tilt (424D only)
Note
The inclinometer senses tilts at 360 °. For tilt
measurements, hold the Meter without a
transverse tilt (±10 °).
Smart Horizontal Mode (424D only)
The Smart Horizontal mode (indirect horizontal distance)
function lets you find a horizontal distance when the
line-of-sight is blocked by an object or obstacle. See
Figure 11 for more information.
The tilt is continuously shown as ° or %. To change the
units, push and hold
  at the same time for
2 seconds. The default unit is °.
To measure:
1. Push
 1x = Smart Horizontal Mode. ` shows in
the display.
2. Point laser at target.
3. Push
. The display shows all results as α (angle
), x (diagonal distance ), and y (vertical distance
). The z (horizontal distance) shows in the
summary line.
4. Push
 to turn off Smart Horizontal Mode.
11
Z
X
Y
X
Y
Z
gwo09.eps
Height Tracking (424D only)
Height tracking shows continuously on the display as the
Meter turns on a tripod. The tilt is continuously shown in
the selected unit of measure as ° or %.
To measure:
1. Push
 2x = Height tracking.  shows in the
display.
2. Point the laser at lower target.
3. Push .  shows in the display with the distance
and angle to the lower target.
4. Move the laser upwards to the top target. Height
Tracking starts automatically. The display shows the
angle to the actual target and the vertical distance
from the lower target.