User Manual

AC Leakage Current Clamp
Clean the Product
13
Clean the Product
Periodically wipe the case with a damp cloth and mild detergent.
W Caution
To avoid damaging the Product, do not use abrasives or solvents to clean the
Product.
1. Inspect the jaw mating surface for cleanliness. If any foreign material is present, the jaw
will not close properly and measurement errors will result.
2. Open the jaws and clean the clamp metal ends with a lightly oiled cloth.
Maintenance
If the Product does not work or perform properly, use these steps to help isolate the problem:
1. Inspect the jaw mating surface for cleanliness. If any foreign material is present, the jaw
will not close properly and measurement errors will result.
2. Verify that the range on the Product is correct.