User Manual

368/369
Users Manual
4
• Do not use the Product if it operates incorrectly.
• Comply with local and national safety codes. Use personal protective
equipment (approved rubber gloves, face protection, and flame-resistant
clothes) to prevent shock and arc blast injury where hazardous live
conductors are exposed.
• Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.
• Limit operation to the specified measurement category, voltage, or
amperage ratings.
• Hold the Product behind the tactile barrier. See the Product Overview
section, item .
• The battery door must be closed and locked before you operate the
Product.
• Replace the batteries when the low battery indicator shows to prevent
incorrect measurements.
• Remove the batteries if the Product is not used for an extended period of
time, or if stored in temperatures above 50 °C. If the batteries are not
removed, battery leakage can damage the Product.
• Do not operate the Product with covers removed or the case open.
Hazardous voltage exposure is possible.
• Repair the Product before use if the battery leaks.