User Manual
279 FC
Users Manual
30
5. To exit and erase the MIN, MAX, and AVG values, push
for 1 second or turn the rotary switch.
6. To see the other recorded values (minimum and
average), push .
Each push of steps through the recorded value for
MAX, MIN, or AVG. When no label shows in this display
location, the display shows the live input signal
measurement.
Note
Auto Off (battery save) is disabled in
MIN
MAX
AVG record mode.
Display Hold
XW Warning
To prevent possible electrical shock, fire, or
personal injury, do not use the HOLD function
to measure unknown potentials. When HOLD
is turned on, the display does not change
when a different potential is measured.
In the display hold mode, the Multimeter holds the
measurement on the display.
To hold a measurement on the display:
1. Push .
The display shows when display hold is turned on.
2. Push again to stop hold mode and show
measurements on the display.