User Manual

True-rms Thermal Multimeter
Before You Start
7
On/Off
Push  to turn on or turn off the Multimeter.
Hanging Strap
The Multimeter includes a hanging strap that allows you to
hang your Multimeter so you can take measurements hands-
free. See Figure 2.
Display Information
Hazardous Voltage
The hazardous voltage warning X shows on the display
when the Multimeter detects a voltage ≥30 V.
Test Lead Alert
The display shows LEAD for a second when you turn the
function switch to or from the  position. This is a reminder
to check that the correct accessory is connected.
Display OL
If the measurement value (does not include temperature
measurements) is over the limit, or outside the measurement
range, the Multimeter shows OL in the display.
Figure 2. Hanging Strap
1
2
4
3