User Manual

Insulation Multimeters

Safety Information

• Do not apply more than the rated voltage between the

terminals or between each terminal and earth ground.

• Limit operation to the specified measurement category,

voltage, or amperage ratings.

• Use Product-approved measurement category (CAT),

voltage, and amperage rated accessories (probes, test

leads, and adapters) for all measurements.

• Measure a known voltage first to make sure that the Product

operates correctly.

• Use the correct terminals, function, and range for

measurements.

• Measure for hazardous voltage without the Low-Pass Filter.

• Do not use the Product if it operates incorrectly.

• Replace the battery when the low battery indicator ()

shows to prevent incorrect measurements.

• Remove the batteries if the Product is not used for an

extended period of time, or if stored in temperatures >50 °C.

If the batteries are not removed, battery leakage can damage

the Product.

• The battery door must be closed and locked before you

operate the Product.

• Remove all probes, test leads, and accessories before the

battery door is opened.

• Do not use the Product if it is damaged.

• Disable the Product if it is damaged.