Datasheet

ManualsBrandsFluke ManualsElectrical & Electronic Test InstrumentsFluke 1587FC Insulation Multimeter + FREE C25 Case and TPAK Fastening Set 2GOhm ±1.5 % IP40

TECHNICAL DATA

Fluke 1587 FC/1577

Insulation Multimeters

FLUKE CONNECT COMPATIBLE

(1587 FC ONLY)

Download the free Fluke Connect

app

from iTunes or Google Play to enable

graphs within the Pi/DAR function, memory

storage, and temperature compensation

DISPLAY

Large, 6000-count back-lit display

VFD

Low-pass filter for accurate motor drive

measurements (1587 FC only)

INSULATION TEST

1587 FC: 0.01 MΩ to 2 GΩ

1577: 0.1 MΩ to 600 MΩ

INSULATION TEST VOLTAGES

1587 FC: 50 V, 100 V, 250 V, 500 V, 1000 V

1577: 500 V, 1000 V

WARRANTY

Three-year standard warranty; extendable

to five-years through product registration

within 45 days of purchase*

Store and share data using the Fluke 1587 FC with Fluke Connect Measurements App.

The High-Performance 2-in-1 Insulation DMM

The Fluke 1587 FC and 1577 Insulation Multimeters combine a

digital insulation tester with a full-featured, true-rms digital multi-

meter in a single compact, handheld unit, which provides maximum

versatility for both troubleshooting and preventative maintenance.

The Fluke 1587 FC Insulation Multimeter adds four powerful new

diagnostic functions through the Fluke Connect

Measurements

app:

• PI/DAR timed ratio tests with TrendIt

™

graphs identifies moisture

and contaminated insulation problems faster

• Memory storage through Fluke Connect eliminates writing down

results, reduces errors and saves data for historical tracking over

time

• Temperature Compensation through app for establishing accu-

rate baselines and relevant historical comparisons

• Historical tracking and trending of assets identifies degradation

over time, allows real-time decisions to be made in the field

with Fluke Connect

Assets (sold separately)

* Two-year additional warranty offer may be discontinued without notice

Summary of content (8 pages)

PAGE 1
TECHNICAL DATA Fluke 1587 FC/1577 Insulation Multimeters The High-Performance 2-in-1 Insulation DMM The Fluke 1587 FC and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true-rms digital multimeter in a single compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.
PAGE 2
Product Highlights • PI/DAR timed ratio tests (1587 FC only) • Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection • VFD low-pass filter for accurate motor drive measurements (1587 FC only) • Auto-discharge of capacitive voltage for added user protection • Insulation test (1587 FC: 0.01 MΩ to 2 GΩ) (1577: 0.
PAGE 3
General specifications cont. Korea (KCC) Class A Equipment (Industrial Broadcasting & Communication Equipment) Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes. USA (FCC) 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
PAGE 4
1577 accuracy Range Resolution 50 Hz to 60 Hz ± (% of Rdg + Counts) 600.0 mV 0.1 mV ± (2 % + 3) 6.000 V 0.001 V ± (2 % + 3) 60.00 V 0.01 V ± (2 % + 3) 600.0 V 0.1 V ± (2 % + 3) 1000 V 1V ± (2 % + 3) AC Conversion Inputs are ac coupled true-rms responding and specified from 5 % to 100 % of range. Input signal crest factor can be up to 3 up to 500 V, decreasing linearly to a crest factor ≤1.5 at 1000 V.
PAGE 5
Ohms measurement Range Resolution 600.0 Ω 0.1 Ω 6.000 kΩ 0.001 kΩ 60.00 kΩ 0.01 kΩ 600.0 kΩ 0.1 KΩ 6.000 MΩ 0.001 MΩ 50.0 MΩ [2] 0.01 MΩ 1 Accuracies apply from 0 % to 100 % of range. 2 Accuracy 1587 FC1 + (% of Rdg+Counts) Accuracy 15771 + (% of Rdg+Counts) ± (0.9 % + 2) ± (1.2 % + 2) ± (1.5 % + 3) ± (2.0 % + 3) Up to 80 % relative humidity. Overload protection: 1000 V rms or dc Open circuit test voltage: <8.0 V dc Short circuit current: <1.
PAGE 6
Insulation specifications Measurement range Model 1587 FC: 0.01 MΩ to 2 GΩ Model 1577: 0.1 MΩ to 600 MΩ Test voltages Model 1587 FC: 50, 100, 250, 500, 1000 V Model 1577: 500, 1000 V Test voltage accuracy +20 %, -0 % Short-Circuit test current 1 mA nominal Auto discharge Discharge time <0.
PAGE 7
Comparison chart 1587 FC PI/DAR timed ratio measurements with TrendIt™ graphs through Fluke Connect Measurements app • Memory storage through Fluke Connect Measurements app • Temperature Compensation through Fluke Connect Measurements app • VFD low-pass filter for accurate motor drive measurements • • Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V • Insulation test voltages 500 V, 1000 V Insulation test: 0.01 MΩ to 2.0 GΩ • Insulation test: 0.
PAGE 8
Ordering information Fluke-1577 Insulation Multimeter Fluke-1587 FC Insulation Multimeter Fluke-1587/MDT FC 2-IN-1 ADV Motor & Drive Kit w/9040, i400 1587KIT/62MAX+ FC 2-IN-1 ADV Elec Kit w/62MAX+ i400 Included Remote probe, test leads, alligator clips, K-type thermocouple (1587 FC only), hard case, user documentation Optional accessories TPAK Magnetic Tool Hanger i400 AC Current Clamp C25 Soft Case See it. Save it. Share it. All the facts, right in the field.