Datasheet

2 Fluke Corporation Fluke 120B Series Industrial ScopeMeter
®
Hand-Held Oscilloscopes
• Shielded test leads for oscilloscope, resistance and
continuity measurements
• Resistance, continuity, diode and capacitance meter
measurements
• Power measurements (W, VA, VAR, PF, DPF, Hz)
• Voltage, current and power harmonics
• Check Industrial networks with BusHealth physical layer tests
against defined reference levels
• Save or recall data and instrument setups
• Store instrument setups defined by a test sequence for routine
maintenance or most often used test procedures.
• External optically isolated USB interface to transfer, archive
and analyze scope or meter data
• Optional WiFi adapter connected to internal USB port to
wirelessly transfer information to the PC, laptop or
Fluke Connect
®
mobile app*
• FlukeView
®
ScopeMeter
®
Software for Windows
®
• Rugged design to withstand 3g Vibration, 30g shock, and
rated IP51 according to EN/IEC60529
• Highest safety rating in the industry: safety rated for
CAT IV 600V
• Li-Ion rechargeable battery, seven-hours operation (with
four-hour charge time)
Connect-and-View™
triggering for an instant,
stable display
Oscilloscope users know how
difficult triggering can be.
Using the wrong settings can
lead to unstable waveform
captures, and sometimes the
wrong measurement data.
Fluke’s unique Connect-and-
View™ triggering technology
recognizes signal patterns, and
automatically sets up the correct
triggering to provide a stable,
reliable and repeatable display.
Connect-and-View™ triggering
is designed to work with virtu-
ally any signal, including motor
drives and control signals—
without adjusting parameters,
or even touching a button.
Signal changes are instantly
recognized and settings are
automatically adjusted, provid-
ing a stable display even when
measuring multiple test points
in quick succession.
IntellaSet
™
/AutoReading
The Auto Readings function
with Fluke IntellaSet™ technol-
ogy uses proprietary algorithms
to intelligently analyze the
measured waveform and auto-
matically displays the most
appropriate numerical measure-
ments on screen, so you can get
the data you need easier than
ever before. As an example,
when the measured wave-
form is a line voltage signal,
the Vrms and Hz readings
are automatically displayed,
whereas if the measured
waveform is a square wave, the
Vpeak-peak and Hz readings
are automatically displayed.
Using IntellaSet™ technology
in conjunction with Connect-
and-View™ automatic triggering
you can be sure you’re seeing
not only the correct wave-
form, but the appropriate
numerical reading as well. All
without touching a button.
*Not all models are available in all countries. Check with
your local Fluke representative.
Fluke Connect-and-View™ triggering
with Auto Reading function using Fluke
IntellaSet™ technology gives you quick
access to the data you need.