Datasheet

2 Fluke Corporation Fluke 120B Series Industrial ScopeMeter
®
Hand-Held Oscilloscopes
• Shielded test leads for oscilloscope, resistance and
continuity measurements
• Resistance, continuity, diode and capacitance meter
measurements
• Power measurements (W, VA, VAR, PF, DPF, Hz)
• Voltage, current and power harmonics
• Check Industrial networks with BusHealth physical layer tests
against defined reference levels
• Save or recall data and instrument setups
• Store instrument setups defined by a test sequence for routine
maintenance or most often used test procedures.
• External optically isolated USB interface to transfer,
archive and analyze scope or meter data
• Optional WiFi adapter connected to internal USB port to
wirelessly transfer information to the PC, laptop or
Fluke Connect
®
mobile app*
• FlukeView
®
ScopeMeter
®
Software for Windows
®
• Rugged design to withstand 3g Vibration, 30g shock,
and rated IP51 according to EN/IEC60529
• Highest safety rating in the industry: safety rated for
CAT IV 600V
• Li-Ion rechargeable battery, seven-hours operation
(with four-hour charge time)
Connect-and-View™
triggering for an instant,
stable display
Oscilloscope users know how
difficult triggering can be.
Using the wrong settings can
lead to unstable waveform
captures, and sometimes the
wrong measurement data.
Fluke’s unique Connect-and-
View
™ triggering technology
recognizes signal patterns, and
automatically sets up the correct
triggering to provide a stable,
reliable and repeatable display.
Connect-and-View
™ triggering
is designed to work with
virtually any signal, including
motor drives and control
signals—without adjusting
parameters, or even touching
a button. Signal changes are
instantly recognized and
settings are automatically
adjusted, providing a stable
display even when measuring
multiple test points in quick
succession.
IntellaSet
™
/AutoReading
The Auto Readings function
with Fluke IntellaSet
™
technology uses proprietary
algorithms to intelligently
analyze the measured
waveform and automatically
displays the most appropriate
numerical measurements on
screen, so you can get the
data you need easier than
ever before. As an example,
when the measured waveform
is a line voltage signal, the
Vrms and Hz readings are
automatically displayed,
whereas if the measured
waveform is a square wave,
the Vpeak-peak and Hz
readings are automatically
displayed. Using IntellaSet
™
technology in conjunction
with Connect-and-View
™
automatic triggering you can
be sure you’re seeing not
only the correct waveform,
but the appropriate numerical
reading as well. All without
touching a button.
*Not all models are available in all countries. Check with
your local Fluke representative.
Fluke Connect-and-View
™ triggering
with Auto Reading function using Fluke
IntellaSet™ technology gives you quick
access to the data you need.