Brochure

Selection Table
Fluke 199C Color ScopeMeter (200 MHz / 2.5 GS/s)
Fluke 199C/S Color ScopeMeter (200 MHz / 2.5 GS/s) + SCC190
Fluke 196C Color ScopeMeter (100 MHz / 1 GS/s)
Fluke 196C/S Color ScopeMeter (100 MHz / 1 GS/s) + SCC190
Fluke 192C Color ScopeMeter (60 MHz / 500 MS/s)
Fluke 192C/S Color ScopeMeter (60 MHz / 500 MS/s) + SCC190
Fluke 125 Industrial ScopeMeter (40 MHz, with Bus Health)
Fluke 125/S Industrial ScopeMeter (40 MHz, Bus Health) + SCC120 kit)
Fluke 124 Industrial ScopeMeter (40 MHz)
Fluke 124/S Industrial ScopeMeter (40 MHz) + SCC120 kit
Fluke 123 Industrial ScopeMeter (20 MHz)
Fluke 123/S Industrial ScopeMeter (20 MHz) + SCC120 kit
SCC190 FlukeView
®
Software + Cable + Case (190 Series)
SCC120 FlukeView
®
Software + Cable + Case (120 Series)
OC4USB Optically-isolated USB-interface cable
PM9080 Optically-isolated RS-232 adapter/cable
SW90W FlukeView
®
ScopeMeter Software for Windows
®
•
ScopeMeter test tools come standard with a complete accessory package including line voltage adapter and battery pack
(installed). ScopeMeter 190C Series comes with probes, probe accessories and multimeter test leads.
•
Optional accessories ordering information can be found in the technical datasheet or on the Fluke web site.
Ordering‑Information
Fluke Corporation
P.O. Box 9090
Everett, WA USA 98206
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
For more information call:
In the U.S.A. [phone]
or Fax [phone]
In Europe/M-East/Africa [phone]
or Fax [phone]
In Canada [phone]
or Fax [phone]
From other countries [phone]
or Fax [phone]
Visit us on the world wide web at:
www.fluke.com or
www.fluke.eu
Fluke (UK) Ltd.
52 Hurricane Way
Norwich
Norfolk
NR6 6JB
United Kingdom
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
www.fluke.co.uk
© Copyright 2006 Fluke Corporation. All rights reserved.
Prices are suggested resale prices (excl. VAT).
Printed in the Netherlands 07/2009.
Data subject to alteration without notice.
Pub_ID: 11182-eng Rev. 02
Max. input voltage 1000V CAT II with VPS40, 40 MHz, 10:1 Voltage Probe (standard included with Fluke 125 and Fluke 124)
Detailed technical specifications and optional accessories can be found in the technical datasheet and on the Fluke web site.
Further details about the Fluke 225C and 215C are presented in a dedicated document.
120 and 190C Series ScopeMeter
®
Test Tools
Color ScopeMeters
With Bus Health Test
Color ScopeMeter 190C Series ScopeMeter 120 Series
Fluke 225C Fluke 215C Fluke 199C Fluke 196C Fluke192C Fluke 125 Fluke 124 Fluke 123
Bandwidth 200 MHz 100 MHz 200 MHz 100 MHz 60 MHz 40 MHz 40 MHz 20 MHz
Max. real time sample rate 2.5 GS/s 1 GS/s 2.5 GS/s 1 GS/s 500 MS/s 25 MS/s
Max. Equivalent time sample rate -- 2.5 GS/s 2.5 GS/s 1.25 GS/s
Display 14.4 cm Full Color LCD 10.2 cm Monochrome LCD
Digital Persistance Yes, gives analog oscilloscope like waveform decay (user selectable) --
Envelope mode Yes Yes
Waveform Compare Visual Reference and Automatic ‘Pass / Fail’ testing --
Max. Record length
... In Scope mode:
... In ScopeRecord mode:
3000 points per input channel, allowing for high time resolution signal analysis using Zoom
27,500 points per input or more (5 ms/div...2 min/div.)
512 min/max points per input
Number of inputs 2 plus external / DMM input, all isolated from each other and from ground 2; opt. Isolated External Trig. thru ITP120
Number of digitizers 2 2
Independently floating isolated inputs Up to 1000 V between inputs, references and ground --
Input sensitivity 2 mV/div. ...100 V/div. 5 mV/div. 500 V/div.
Glitch capture Up to 3 ns using Pulse Width triggering; 50 ns peak detect at 5 µs/div. to 1 min/div. 40 ns
Timebase range in Scope mode 5 ns/div. to 2 min/div.
10 ns/div. ...
2 min/div.
10 ns/div. ...1 min/div.
20 ns/div. ...
1 min/div
Trigger types
Connect-and-View™, Free Run, Single Shot, Edge, Delay, Video Frame, Video Line, Connect-and-ViewTM, Free Run,
Selectable pulse width and External. Dual slope trigger and Event trigger (n-cycle) Single Shot, Edge, Video
Scope Measurements
7 cursor measurements, 30 automatic measurements
Automatic Vrms and watts measurement on cursor limited part of waveform
As 124 + Power,
VA, VAR, PF, RPM,
Vpwm; THD
Cursor + 26
Automatic
measurement
26 automatic
measurements
Bus Health Test function
Signal validation and eyepattern mode
for standard industry buses
--
For standard
industry buses
--
Waveform Mathematics
A + B, A - B, A x B, A versus B (X-Y-mode, giving Lissajous diagrams)
Frequency Spectrum (FFT)
Harmonics
mode
--
Power Measurements P (W), VA, VAR, PF
Power, VA, VAR,
PF, Vpwm
--
Scope-Record Trigger modes Start on Trigger, Stop on Trigger --
Capture last 100 screens Automatic, with Replay capability --
Dual input TrendPlot Yes, with Cursors and Zoom Yes, with cursors Yes
Memory for screens/set-ups
10 screens and set-ups;
5 more memories are made available upon registration of the ScopeMeter
20 10
Memory for recordings Two, each can store 100 scope screens, a ScopeRecord or a TrendPlot
True RMS multimeter 5000 counts, Volts, Amps, Ohms, Continuity, Diode, Temp Dual fully featured 5000 counts DMM
Safety certified (EN61010-1) 1000 V CAT II / 600 V CAT III (instrument and included accessories)
600 V CAT III
(Instrument and included accessories)
Battery (installed) 3.5 hr Ni-MH (BP190) 7 hr Ni-MH (BP120MH)
BHT190 Bus Health adapterset Included -- optional --
Line power Adapter / battery-charger included (BC190) Adapter / Battery charger included (PM8907)
Size (cm) 25.6 x 16.9 x 6.4 cm 23.2 x 11.5 x 5.0 cm
Weight 2 kg 1.2 kg
PC and Printer interface Using optional Optically Insulated adapter / cable OC4USB (USB) or PM9080 (RS-232)
Warranty 3 years on main instrument, 1 year on the standard accessories