Brochure

The compact ScopeMeter 120 Series is the rugged solution for industrial
troubleshooting and installation applications. It is a truly integrated
test tool, with oscilloscope, multimeter and “paperless” recorder in one
affordable, easy-to-use instrument. Find answers to problems
in machinery, instrumentation, control and power systems quickly
and easily.
•
Dual-input 40 MHz or 20 MHz digital oscilloscope
•
Two 5,000 counts true-RMS digital multimeters
•
Automatic measurements
•
A dual-input TrendPlot™ recorder
•
Connect-and-View™ trigger simplicity for hands-off operation
•
Shielded test leads for oscilloscope, resistance and continuity measurements
•
10:1 voltage probe included with Fluke 124 and 125 for high frequency
measurements
•
Up to 7 hours battery operation
•
600 V CAT III safety certified
•
Optically-isolated interface for PC connection
•
Rugged, compact case
•
New Fluke 125 gives bus health and power measurements
In today’s complex systems, a meter
measurement just doesn’t give enough
detail to determine the cause of a fault.
Signal anomalies, dropouts and glitches
that might cause a machine to go down
are best displayed with an oscilloscope.
The ScopeMeter 120 Series meets today’s
need of simultaneously measuring and
checking waveforms. The unique Connect-
and-View™ triggering auto matically
displays stable waveforms of virtually any
signal. It really is as easy as 1-2-3!
Floating measurements,
safety certified
While conventional oscilloscopes can only
make measurements referenced to power
line ground, the Fluke 120 Series makes
floating measurements so there’s no risk of
an accidental ground short circuit when
making a connection.
The Fluke ScopeMeter 120 Series test tools
and the included shielded test leads are
safety certified for measurements on 600 V
CAT III industrial power systems. Using the
VPS40 probe, measurements up to 1000 V
CAT II are fully supported. Via the optically
isolated interface, the ScopeMeter 120 can
be safely connected to a printer for direct
print-out or to a PC for later analysis and
documentation using FlukeView
®
Software.
ScopeMeter
®
120 Series:
Three-in-one simplicity
Dual-input measurement shows both meter
reading and waveform at the same time.
One test lead measures all
High frequency waveform, meter,
capacitance and resistance measurements
as well as continuity checks are all
covered by the shielded test leads.
No time wasted finding or swapping leads.
The included accessories allow hook-up
at test objects of every dimension.