Brochure

FlukeView for Windows
®
helps you get more out of your ScopeMeter
®
by:
•
Documenting – transfer waveforms, screens and measurement data from the
ScopeMeter to a PC. Print or import the data into your report.
•
Adding user text to individual ScopeMeter settings – providing guidance to the
operator when recalling a set-up.
•
Archiving – create a library of waveforms with your comments for easy reference
and comparison. Store complete Replay cycles for analysis of waveform changes.
Store complete memory content of the ScopeMeter on your PC for back-up purposes.
•
Waveform Compare – store reference waveforms, add operator instructions, and
send both to the ScopeMeter for waveform comparison and “Pass/Fail” testing.
•
Analysis – use cursors, perform spectrum analysis or export data to other
analysis programs.
ScopeMeter test tools are connected to a PC via an optically isolated
interface cable. Software and cable come as separate items or as part of a
special value kit. This kit also includes a protective hard shell carrying case
for safe and convenient storage of the instrument and its accessories.
Cursors and zoom function help you to
analyze the captured TrendPlot.
V
pwm
measures effective voltage on motor
drive and frequency inverter outputs.
ScopeMeter
®
120 and 190C Series –
all this power in your hand
SCC190 Kit
SCC120 Kit
V
pwm
measurement
When working with variable speed
motor drives or frequency inverters, the
output voltages have high and constant
amplitudes, yet the pulse width varies to
control the motor current. The V
pwm
measurement is optimized to give you a
reading of the voltage exactly as the motor
perceives it.
ScopeMeter Special Value Kit
FlukeView Software and the optically-
isolated interface cable are available
separately or together as part of the
special value SCC-Kit. This kit contains:
•
FlukeView software (SW90W)
•
Optically-isolated interface cable for USB
(OC4USB)
•
Protective hard-shell carrying case
(C190 or C120)
The SCC-kit can be ordered separately, or
with the main instrument by adding “/S”
to the main instrument type number, e.g.,
Fluke 199C/S (see Ordering Information on
back cover for more details).
Use TrendPlot™ to help find
intermittents, fast
The toughest faults to find are those that
happen only once in a while – inter-
mittents. They can be caused by bad
connections, dust, dirt, corrosion or simply
broken wiring or connectors. Other factors,
like line outages and sags or the starting
and stopping of a motor, can also cause a
machine to stop. You may not be around
to see it, your Fluke ScopeMeter will. In
this “paperless recorder” mode, you can
plot the minimum and maximum peak
values and average over time up to 16
days.
The two inputs can plot any combination
of volts, amps, temperature, frequency and
phase – with time and date stamp –
to help lead you to the cause of those
faults quickly.