User Manual

If duplicate UUT numbers exist within a customer, you are in-
formed about this directly by a corresponding message.
The "UUT number, Name, Type, Serial No., Manufacturer, test
code, remark, Type name, Device type, Year of manufacture,
Current, Voltage and Power" fields are printed on the test re-
ports.
After the entry your data record should look as follows:
Complete data record for UUT
Performance of tests
The due UUTs are firstly displayed in a list and selected. The list is
then printed out.The tests must be performed and the measurements
transferred back into the Fluke DMS database.Test reports are then
printed.
Preparation of the test instrument
1) -Delete the measurement memory on your test instrument.
Quick Reference Guide
Example for Fluke DMS 0702/PAT
16