User Manual

Program start
You now start the Fluke DMS program. At the first program start you
will be asked for the following entries:
• Interface
• Company name/company logo
Corresponding windows appear in each case one after the other.
Confirm the entries corresponding to your requirements.You can also
later change all settings for interface, language, company name and
company logo under the 'Setup' menu.
You are then in the main window of the application.
Main window after the start of Fluke DMS (e.g. 0702/PAT)
Program operation
Main menu
The menu bar with the main menu is located at the upper border.You
reach all functions of the program via this. The main menu has the
following functions
"File | Module | Edit | View | Protocol | Settings | ?".
Explanation of the menu functions
Menu functions
The menu bar with the main menu is located at the upper border.You
reach all functions of the program via this. In addition, some program
functions can be selected directly by the buttons located below, see
also the next page.
Quick Reference Guide
Program start
7