User Manual

1) A window appears with the statement of the assignment for the

read in measurements.

"Assign the measurement to:" window

2) Enter the customer, the installation and the test to which the read

in measurements should be assigned. Select sample customer,

example 1 and initial test and confirm with "Continue".

The automatic assignment of the measurement result to the

distributions and current circuits can take place only if the dis-

tribution and current circuit codes were entered correctly cor-

responding the current circuit list.

Assignment of the measurements to distri-

bution and current circuits

A list with the read in measurements now appears.

"Read in data" window

1) Click on the "Process data" button and the read in data are ac-

cepted in the Fluke DMS database.

2) Then click on the "Close" button, to close the window:

3) Check the assignment of the measurements to the distribution

and the individual current circuits in the database, to do this se-

lect sample customer, example 1, initial test, '001 meter cabinet

with distribution field' and 001 1F1 back-up fuse'.

Quick Reference Guide

Example for Fluke DMS 0100/INST