User Manual

Performance of tests and measurements
A current circuit list with the codes, numbers and names for the dis-
tributions and current circuits is printed out. This serves as template
for storing the measurements in the test instrument.
An explanation for the distribution is printed out. The numbers and
names of the associated current circuits are printed on this.
Preparation of the test instrument
1) Delete the measurement memory on your test instrument.
Printout of a current circuit list for distribu-
tion and current circuits
The codes, numbers and names for the distribution and current cir-
cuits are printed on the current circuit list.
The current circuit list serves as template for storing the mea-
surements in the test instrument under the correct distribution
and current circuit code.
In the Fluke Installation tester 1653 the distribution code
must be entered under 'a' and the current circuit code
under 'b' so that the assignment in Fluke DMS can be made
correctly!
1) Select customer, installation (sample code, example 1, initial
test) corresponding to the "Show tests" picture.
Quick Reference Guide
Example for Fluke DMS 0100/INST
30