Information

ManualsBrandsFLUKE ManualsTest EquipmentVDE Tester

PN 4477550 October 2015

Specifications are subject to change without notification.

All product names are trademarks of their respective companies.

1662/1663/1664 FC

Electrical Installation Tester

Safety Information

Go to www.fluke.com to register your Product and find more

information.

A Warning identifies conditions and procedures that are dangerous

to the user.

 Warnings

To prevent possible electrical shock, fire, or personal

injury:

• Use the Product only as specified, or the protection

supplied by the Product can be compromised.

• Carefully read all instructions.

• Read all safety information before you use the Product.

• Do not use the Product around explosive gas, vapor, or

in damp or wet environments.

• Comply with local and national safety codes. Use

personal protective equipment (approved rubber gloves,

face protection, and flame-resistant clothes) to prevent

shock and arc blast injury where hazardous live

conductors are exposed.

• Do not use the Product in distribution systems with

voltages >550 V.

• Use Product-approved measurement category (CAT),

voltage, and amperage rated accessories (probes, test

leads, and adapters) for all measurements.

• The battery door must be closed and locked before you

operate the Product.

• Examine the case before you use the Product. Look for

cracks or missing plastic. Carefully look at the insulation

around the terminals.

• Do not use test leads if they are damaged. Examine the

test leads for damaged insulation and measure a known

voltage.

Summary of content (5 pages)

PAGE 1
662/1663/1664 FC Electrical Installation Tester Safety Information Go to www.fluke.com to register your Product and find more information. A Warning identifies conditions and procedures that are dangerous to the user.  Warnings To prevent possible electrical shock, fire, or personal injury: • Use the Product only as specified, or the protection supplied by the Product can be compromised. • Carefully read all instructions. • Read all safety information before you use the Product.
PAGE 2
• Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc. • Use the correct terminals, function, and range for measurements. • Do not apply more than the rated voltage between the terminals or between each terminal and earth ground. • Do not exceed the Measurement Category (CAT) rating of the lowest rated individual component of a Product, probe, or accessory. • Keep fingers behind the finger guards on the probes. • Measure a known voltage first to make sure that the Product operates correctly.
PAGE 3
Symbols Symbol Description  WARNING. RISK OF DANGER.  WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.  Consult user documentation.  Fuse  Double Insulated  Earth  ,/ - WARNING. Do not apply >550 Volts. Battery Status  Measurement Category III is applicable to test and measuring circuits connected to the distribution part of the building’s low-voltage MAINS installation.
PAGE 4
Safety Specifications Fuses........................................ T3.15 A, 500 V, IR: 1500 A Battery ...................................... 6 x AA Alkaline IEC LR6 Operating temperature ............. -10 °C to +40 °C Storage temperature ................ -10 °C to +60 °C (limited by battery specification) -40 °C for 100 hrs Relative Humidity ..................... 80 % 10 °C to 35 °C 70 % 35 °C to 40 °C Altitude Operating.............................. 2 000 m Storage .................................
PAGE 5
Electromagnetic Compatibility (EMC) International ......................... IEC 61326-1: Portable CISPR 11: Group 1, Class A Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself. Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a lowvoltage power supply network that supplies buildings used for domestic purposes.