Brochure
Fluke 725Ex Multifunction
Process Calibrator
Best suited for:
• Calibrating virtually any process parameter
Features:
• Class I Div 1 Groups B-D 171 °C
• ATEX II IG Ex ia IIB 171 °C Compliant
• Measure, source or simulate volts dc, mA, RTDs,
thermocouples, frequency and ohms
• 2-channel simultaneous source and measure capability
for calibration of transmitters
• Internal loop supply to power transmitters
• Store frequently-used test setups for later use
• Pressure measurement to 200 bar and pressure switch
test using any of the 8 Fluke 700PEx pressure modules
Fluke 568 Ex Intrinsically Safe
Infrared Thermometer
Best suited for:
• Taking spot, differential or scanning temperature
measurements in any environment where flam-
mable gases or vapors may be present
Features:
• Class I Div 1 and Div 2 or Zone 1 and 2
hazardous environments
• ATEX/IECEx, NEC-500/NEC-505, PCEC,
INMETRO certified
• Enhanced 50:1 distance to spot ratio allows user to measure
smaller objects from farther away
• Comfortable pistol grip makes target pointing an easy job
• Backlit display for poorly lit areas
• Displays Min/Max/DIF/AVG measurements and saves in memory
• Adjustable emissivity setting for more accurate measurements
• Log up to 99 measurements
• Compatible with mini-connector K-type thermocouple (KTC) probe
Fluke 707Ex Loop Calibrator
Best suited for:
• Calibration and maintenance of 4 to 20 mA control loop
Features:
• F.M. Class I Div 2 Groups A-D T4
• ATEX II 2G Ex ia IIC T4 compliant
• Large display and simple, quick-click push/rotary
button for easy one-handed operation
• Simultaneous mA and % readout for quick,
easy interpretation of readings
• mA accuracy of 0.015 %, superior to other loop calibrators
• Pushbutton with 25 % steps for fast, easy linearity checks
• 0 and 100 % ‘span check’ for fast confirmation of zero and span
For more information on these ATEX-compliant tools designed for tough process maintenance and calibration tasks, visit www.fluke.com/ex
Fluke 28II Ex True-rms
Industrial Multimeter
Best suited for:
• Solving problems on motor drives, in plant automation,
power distribution and electromechanical equipment
Features:
• Class I Div 1 Groups A-D
• ATEX II 2 G Ex ia IIC T4 Gb
• ATEX II 2 D Ex ia IIIC T130C Db
• ATEX I M1 Ex ia I Ma
• Low voltage troubleshooting in hazardous areas
• Built-in thermometer allows you to take temperature
readings
• Large digit display with bright, two-level
• IP67 rated, waterproof and dustproof
Best suited for:
• Pressure measurements and calibration with internal sensor
at pressure ranges of 2, 7 and 20 bar
Features:
• Class I Div 1 Groups A-D T4 Compliant
• ATEX II IG Ex ia IIC T4 compliant
• Built-in pressure/vacuum hand pump, with vernier and
bleed valve
• Pressure measurement to 200 bar using any of the 8 Fluke
700PEx Pressure Modules
• Pressure measurement to 0.05 % of full span using internal
pressure sensor
• Pressure switch test function
700G Series Precision
Pressure Test Gauges
Best suited for:
• Precision pressure measurement from
0 inH
2
O/20 mbar to 10,000 psi/690 bar and
absolute pressure measurement
Features:
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Log up to 8,493 pressure measurements to memory
Fluke 718Ex Pressure Calibrator