Brochure

Fluke 700PEx
Pressure Modules
Best suited for:
• Use with the Fluke 725Ex Multifunctional Process Calibrator and
Fluke 718Ex Pressure Calibrator to cover the most commonly used
pressure calibration ranges from 0-25 mbar up to 0-200 bar
Features:
• I.S. Class I Div 1 Groups A-D T4, Ta = 0 °C to +50 °C
• ATEX II 1G Ex ia IIC T4 compliant
• Very high accuracy up to 0.025 %
Legend
Motor Control Center Process Measurements
Flow Computer Process Controller
Tank Farm Pumping Station
For more information on these ATEX-compliant tools designed for tough process maintenance and calibration tasks, visit www.fluke.com/ex
Fluke Intrinsically Safe products
help to keep you safe on the job
“Intrinsically Safe” or I.S. is a
protection method employed
in potentially explosive atmo-
spheres. Certified I.S. tools are
designed to prevent the release
of sufficient energy to cause
ignition of flammable materi-
al. I.S. standards apply to all
equipment that can create one
or more of a range of defined
potential explosion sources:
•
Electrical sparks
•
Electrical arcs
•
Flames
•
Hot surfaces
•
Static electricity
•
Electromagnetic radiation
•
Chemical reactions
•
Mechanical impact
•
Mechanical friction
•
Compression ignition
•
Acoustic energy
•
Ionizing radiation
Industries that use or should
use I.S. tools include:
•
Petro-chemical
•
Oil platforms and refineries
•
Pharmaceutical
•
Pipelines
•
Any environment where
explosive gases or vapors
could be present
1551/1552 “Stik”
Thermometers
Best suited for:
• Daily checks of working thermometers
• Custody transfer temperature determination, PET
calibration, LIG calibration, temperature transmitter
calibration and verification
Features:
• ATEX II 2 G Ex ib IIB T4 Gb, Ta -10 °C to 50 °C
1551A range: -50 °C to 160 °C (-58 °F to 320 °F)
1552A range: -80 °C to 300 °C (-112 °F to 572 °F)
• Accuracy (1 year): ± 0.05 °C (± 0.09 °F)
• Easy data logging available with 1552A