Data Sheet

Fluke Corporation
PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa (31 40) 2 675 200 or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com
©2006 Fluke Corporation. All rights reserved.
Specifications subject to change without notice.
Printed in U.S.A. 12/2006 2805740 D-EN-N Rev A
Fluke. Keeping your world
up and running.™
Function Range Resolution Accuracy ± ([% of reading] + [counts])
AC volts (average
responding)
6.000 V 0.001 V
2.0 % + 2 (45 Hz to 1 kHz)
60.00 V 0.01 V
600.0 V 0.1 V
1000 V 1 V
DC mV 600.0 mV 0.1 mV 0.3 % + 1
DC volts 6.000 V 0.001 V
0.3 % + 1
60.00 V 0.01 V
600.0 V 0.1 V
1000 V 1 V
Continuity 600 W 1 W Meter beeps at < 25 W, beeper turns off at
> 250
W; detects opens or shorts of 250 µs
or longer.
Ohms 600.0 W 0.1W 0.5 % + 2
6.000 k
W 0.001 kW
0.5 % + 1
60.00 k
W 0.01 kW
600.0 k
W 0.1 kW
6.000 M
W 0.001 MW
50.00 M
W 0.01 MW 2.0 % + 2
Diode test 2.400 V 0.001 V 1 % + 2
Capacitance 1000 nF 1 nF
1.2 % + 210.00 µF 0.01 µF
100.0 µF 0.1 µF
9999 µF
1
1 µF 10 % typical
AC amps (average
responding)
60.00 mA 0.01 mA
2.5 % + 2 (45 Hz to 1 kHz)
400.0 mA
3
0.1 mA
6.000 A 0.001 A
10.00 A
4
0.01 A
DC amps
3
60.00 mA 0.01 mA
400.0 mA
4
0.1 mA
1.5 % + 2
6.000 A 0.001 A
10.00 A
5
0.01 A
Hz
2,5
(ac voltage input)
99.99 Hz 0.01 Hz
0.1 % + 1
999.9 Hz 0.1 Hz
9.999 kHz 0.001 kHz
99.99 kHz 0.01 kHz
MIN MAX AVG For dc functions, accuracy is the specified accuracy of the measurement function
(12 counts for changes longer than 275 ms in duration.
For ac functions, accuracy is the specified accuracy of the measurement function
(40 counts for changes longer than 1.2 s in duration.
1 In the 9999 (F range for measurements to 1000 (F, the measurement accuracy is 1.2 % + 2.
2 Amps input burden voltage (typical): 400 mA input 2 mV/mA, 10 A input 37 mV/A.
3 400.0 mA accuracy specified up to 600 mA overload.
4 >10 A unspecified.
5 Frequency is specified from 2 Hz to 99.99 kHz. Below 2 Hz, the display shows zero Hz.
Ordering
information
Fluke-77-4 Digital Multimeter
Included
TL75 Test leads, user’s manual and
9 V battery (installed).
2 Fluke Corporation 77IV Digital Multimeter