Software Guide

SW43W
Users Manual
2
1. Select the Com Port that connects the instrument to the PC.
2. Click Connect to establish a connection with the instrument.
Selecting the Baud Rate
If you want FlukeView to communicate at another baud rate do the following:
1. In the Instrument Connect menu click on Advanced. The dialog box shown
below appears .
Note:
To see the Instrument Connect menu click
(connect/disconnect) in the
toolbar button (most left button):
2. Click Disconnect if you are connected.
3. Select the Baud Rate, for example 57600.
4. Click Connect to establish a connection with the instrument.