Datasheet

ScopeMeter 190 Series II Fluke Corporation 7
190-062 190-102 190-202 190-502 190-104 190-204
Environmental
Operating temperature 0 °C ~ +40 °C; +40 °C ~ +50 °C excl. battery
Storage temperature -20 °C ~ +60 °C
Humidity +10 °C ~ +30 °C: 95 % RH non-condensing;
+30 °C ~ +40 °C: 75 % RH non-condensing;
+40 °C ~ +50 °C: 45 % RH non-condensing
Maximum operating altitude Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V;
up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V
Maximum storage altitude 12 km (40,000 ft)
Electro-Magnetic-
Compatibility (EMC)
EN 61326 (2005-12) for emission and immunity
Interfaces Two USB-ports provided. Ports are fully insulated from instrument’s floating measurement circuitry USB-host
port directly connects to external flash memory drive (up to 2 GB) for storage of waveform data, complete
datasets in which data and setup information is included, instrument settings and screen copies
A mini-USB-B is provided which allows for interconnection to PC for remote control and data transfer under PC-
control
Probe calibration output Dedicated probe-cal output with reference contact provided,
fully insulated from any measurement input channel
Warranty Three years (parts and labor) on main instrument, one year on accessories
Included accessories
Battery charger/mains adapter BC190
Li-Ion battery pack BP290 (2400 mAh) BP291 (4800 mAh)
Voltage probe sets. Each set
includes ground lead, hook
clip, ground spring and probe
tip insulation sleeve.
VPS410 (one red, one blue) VPS410 (one red, one grey, one
blue, one green)
Test leads TL175 (one red, one black) with test pins (N/A)
Voltage Probes VPS410-x: each set includes: Ground lead, hook clip, ground spring and probe tip insulation sleeve.
VPS510-x: each set includes: Ground lead, hook clip, ground spring, probe tip insulation sleeve
and BNC-to probe tip adapter.
Other Li-Ion battery (BP290 or BP291, see above); Battery charger (BC190); Hangstrap; Handstrip
(user selectable for left- or right hand use); Multi language users manuals on CD-ROM;
FlukeView
®
demo package (with restricted functionality); USB interface cable for PC connectivity.