Data Sheet

ManualsBrandsFLUKE ManualsLaboratory Test Equipment190-202/S -channel hand-held oscilloscope, ScopeMeter® 190 series II, hand-held

ScopeMeter

190 Series II

Technical Data

190 Series II – a new generation of ScopeMeter

The 190 Series II include these capabilities:

• Up to four independent floating isolated inputs, up to 1000 V

• High-speed sampling: Up to 2.5 GS/sec on 2 channels simultaneously

• Deep memory: 10,000 points per trace waveform capture (scope mode)

• CAT III 1000 V/CAT IV 600 V safety rated for industrial environments

• Up to seven hours of battery operation using BP291

• Isolated USB host port for direct data storage to a USB memory device;

USB device port for easy PC communication

• Easy access battery door for quick battery swaps in the field

• Compact and only 2.2 kg (4.8 lb)

• Security slot: lock down oscilloscope with Kensington

lock while

unattended

• IP 51 rating, dust- and drip-proof

• Connect-and-View

™

triggering for intelligent, automatic triggering on

fast, slow and even complex signals

• Frequency Spectrum using FFT-analysis

• Automatic capture and REPLAY of 100 screens

• ScopeRecord

™

Roll mode gives 30,000 points per input channel for low

frequency signal analysis

• TrendPlot

™

paperless recorder mode with deep memory for long-term

automatic measurements

• 5,000 count DMM included in the 2-channel models



ScopeMeter 190 Series II – the first

high-performance scopes built for

harsh industrial environments

Introducing the first high-performance portable oscil-

loscopes with 2 or 4 independently insulated input

channels, an IP51 dust- and dripwater proof rating and a

CAT III 1000 V/CAT IV 600 V safety rating. Choose from

200 MHz, 100 MHz or 60 MHz bandwidth models. Now

plant maintenance engineers can take a 2- or 4-channel

scope into the harsh world of industrial electronics.

Summary of content (8 pages)

PAGE 1
ScopeMeter® 190 Series II Technical Data ScopeMeter 190 Series II – the first high-performance scopes built for harsh industrial environments Introducing the first high-performance portable oscilloscopes with 2 or 4 independently insulated input channels, an IP51 dust- and dripwater proof rating and a CAT III 1000 V/CAT IV 600 V safety rating. Choose from 200 MHz, 100 MHz or 60 MHz bandwidth models.
PAGE 2
Oscilloscope Modes 190-062 190-102 190-202 190-104 190-204 Vertical deflection Number of channels Bandwidth Rise time Number of scope inputs Channel architecture 2 2 2 4 4 60 MHz 100 MHz 200 MHz 100 MHz 200 MHz 5.8 ns 3.5 ns 1.7 ns 3.5 ns 1.
PAGE 3
Automatic capture of 100 screens When in oscilloscope mode, the instrument ALWAYS memorizes the last 100 screens—no specific user setup required. When an anomaly is seen, the REPLAY button can be pressed to review the full sequence of screen events over and over. Instrument can be set up for triggering on glitches or intermittent anomalies and will operate in “baby-sit” mode capturing 100 specified events Replay Manual or continuous replay.
PAGE 4
Meter Modes 190-062 Meter inputs Number of readings Maximum resolution Input impedance Advanced meter functions 190-102 190-202 190-104 190-204 Via 4 mm banana inputs, fully isolated from scope inputs and scope ground Via BNC scope inputs One at a time 5,000 counts Up to 4 simultaneously 999 counts 1 MΩ ± 1 % // 14 pF ± 2 pF Auto/manual ranging, relative measurements (Zero reference), TrendPlot™ recording The specified accuracy is valid over the temperature range 18 °C to 28 °C Add 10 % of specifie
PAGE 5
Recorder Modes 190-062 190-102 190-202 190-104 190-204 ScopeRecord™ Roll Mode Dual or multiple input waveform storage mode, using deep memory Source and display Input A, Input B, Dual All channels sampled simultaneously Bandwidth Memory depth Min/max values Recording modes Stop-on-trigger Horizontal scale Zoom Memory Any combination of inputs, up to 4 channels All channels sampled simultaneously 20 MHz or 20 kHz, user selectable 30,000 data points, each holding min/max pair of information Min/max valu
PAGE 6
General Specifications 190-062 190-102 190-202 190-104 190-204 Input voltage range Rated maximum floating voltage CAT III 1000V/CAT IV 600V (maximum voltage between any contact and earth-ground voltage level) CAT III 1000V/CAT IV 600V (maximum voltage between standard 10:1 probe tip and reference lead) CAT IV 300 V (maximum voltage on BNC input directly) CAT III 1000V/CAT IV 600V — (safety designed banana input connectors) Maximum probe voltage Maximum BNC input voltage Maximum voltage on meter input
PAGE 7
190-062 190-102 190-202 190-104 190-204 Environmental Operating temperature Storage temperature Humidity Maximum operating altitude Maximum storage altitude Electro-Magnetic-Compatibility (EMC) Interfaces Probe calibration output Warranty 0 °C ~ +40 °C; +40 °C ~ +50 °C excl. battery -20 °C ~ +60 °C +10 °C ~ +30 °C: 95 % RH non-condensing; +30 °C ~ +40 °C: 75 % RH non-condensing; +40 °C ~ +50 °C: 45 % RH non-condensing.
PAGE 8
Ordering Information Models Fluke 190-204 Color ScopeMeter, 200 MHz, 4 channels Fluke 190-204/S Color ScopeMeter, 200 MHz, 4 channels, with SCC-290 kit included Fluke 190-104 Color ScopeMeter, 100 MHz, 4 channels Fluke 190-104/S Color ScopeMeter, 100 MHz, 4 channels, with SCC-290 kit included Fluke 190-202 Color ScopeMeter, 200 MHz, 2 channels plus DMM/Ext.input Fluke 190-202/S Color ScopeMeter, 200 MHz, 2 channels plus DMM/Ext.