User manual

Fluke 190-104, Fluke 190-204
Users Manual
80
Using the Tilt Stand
The test tool is equipped with a tilt stand, allowing viewing
from an angle while placed on a table. The typical position
is shown in Figure 39.
Kensington lock
support
®
Power adapter input
Figure 39. Using the Tilt Stand
Note
An optional Hanging Hook, ordering code HH290,
can be attached to the rear of the test tool. The
hook enables you to hang the test tool at a
convenient viewing position, for example a
cabinet door or a separation wall.
Kensington
®
-lock
The test tool is provided with a security slot compatible
with a Kensington
®
lock, see Figure 39.
The Kensington Security Slot along with a locking cable
provides physical security against thefts of opportunity.
Locking cables can be obtained from, for example, laptop
computer accessory dealers.