User manual

Fluke 190-104, Fluke 190-204
Users Manual
20
4
ENTER
Open the PEAK menu.
5
ENTER
Select the Peak-Peak
measurement.
Figure 8 shows an example of the screen with two
readings. The character size will be reduced when more
then two readings are on.
Figure 8. Hz and V peak-peak as Scope Readings
Making Automatic Meter Measurements
The test tool offers a wide range of automatic meter
measurements. You can display four large numeric
readings: R
EADING 1 … 4. These readings are selectable
independently, and the measurements can be done on the
input A, B, C or input D waveform. In METER mode the
waveforms are not displayed. The 20 kHz HF rejection
filter (see Working with Noisy Waveforms on page 29) is
always on in the METER mode.
Selecting a Meter Measurement
To choose a current measurement for input A, do the
following:
1
METER
Display the METER key labels.
2
F1
Open the Reading .. menu.
3
F1
Select the reading number to be
displayed, for example READING 1