User's Manual

Supplement

Title: 360 Instruction Sheet

Supplement Issue: 1

Part Number: 2726405 Issue Date: 6/08

Print Date: October 2006 Page Count: 2

Revision/Date:

This supplement contains information

necessary to ensure the accuracy of the

above Instruction Sheet.

PAGE 1
Supplement Title: 360 Instruction Sheet Supplement Issue: 1 Part Number: 2726405 Issue Date: 6/08 Print Date: October 2006 Page Count: 2 Revision/Date: This supplement contains information necessary to ensure the accuracy of the above Instruction Sheet. x © 2008 Fluke Corporation. All rights reserved. Printed in the U.S.A.
PAGE 2
360 Instruction Sheet Supplement Change #1, 47119 Under Auto Power Off, add the following Paragraph: Press mA/A or HOLD button to postpone automatic power off for another 10 minutes. To disable auto power off, press the hold button and power button when turning on clamp meter. After approximately 3 seconds, the auto off indicator will turn off. The clamp meter will default to auto off enabled at power on.
PAGE 3
Supplement 360 Instruction Sheet Under General Specifications, replace the Temperature Coefficient section with the following: Temperature Coefficient <18 °C or >28 °C Measuring range: 0 to 50 A ±0.08 % of reading/°C + 0.5 digit Measuring range: 50 to 60 A ±0.3 % of reading/°C ± 0.