User's Manual

771 English Instruction Sheet
Page 3
• Use extreme caution when working around bare
conductors or bus bars. Contact with the
conductor could result in electric shock.
• To avoid false readings that can lead to electrical
shock and injury, replace the batteries as soon as
the low battery indicator
B
appears.
• Adhere to local and national safety codes.
Individual protective equipment must be used to
prevent shock and arc blast injury where
hazardous live conductors are exposed.
• When measuring, keep fingers behind theTactile
Barrier.
• Not to be used on non-insulated conductors.
Table 1 explains the symbols that are used on the Meter or in this
instruction sheet.
Table 1. Symbols
-
Do not apply around, or remove from HAZARDOUS LIVE
conductors
W
Risk of danger. Important information. See Users Manual.
X
Risk of Electrical Shock
T
Equipment protected by double or reinforced insulation
M
Battery
P
Conforms to relevant European Union directives
F
DC (Direct Current)
~
Do not dispose of this product as unsorted municipal
waste. Contact Fluke or a qualified recycler for disposal.
;
N10140
Conforms to relevant Australian standards
)
Conforms to relevant Canadian and US standards
CAT II
300 V
Equipment is designed to protect against transients in
equipment in fixed-equipment installations, such as
distribution panels, feeders and short branch circuits, and
lighting systems in large buildings.