Datasheet

ManualsBrandsFLUKE ManualsTest & MeasurementHandheld multimeter digital 233 Wireless display CAT III 1000 V, CAT IV 600 V Display (counts): 6000

TECHNICAL DATA

Fluke 233

Remote Display Multimeter

The Fluke 233 True-rms Remote Display Digital

Multimeter allows you to be in two places

at once.

• Removable display gives the user ultimate flexibility in unusual

measurement scenarios

• Place the display where you can see it and then put the meter

where it is convenient for you—no more juggling of leads and the

meter while stretching into a tight spot

• Removes the dilemma of trying to take measurements in hard-

to-reach places, or making measurements in machines or panels

that are

physically separated from a limit or isolator switch

• Can be used in areas where the operator can’t be close to the

active measurement point, like clean rooms or hazardous areas.

• True-rms ac voltage and current for accurate measurements on

non-linear signals

• Measure up to 1000 V ac and dc

• Measure up to 10 A (20 A for 30 seconds)

• 10,000 µF capacitance range

• Frequency to 50 kHz

• Built in thermometer conveniently allows you to take temperature

readings without having to carry a separate instrument

• Resistance, continuity and diode test

Features

• Low power wireless technology allows the display to be carried

up to 10 meters (33 ft) away from the point of measurement for

added flexibility.

No interference with measurements

• The removable magnetic display can be conveniently mounted

where it is easily seen

• Make measurements without holding the meter to improve visual

focus on probes and augment safe electrical measurements

• Use as a conventional multimeter when the display is connected

• Radio transmitter automatically turns off when the display is

connected to the meter

• Auto power off maximizes battery life

• Min/Max and Average recording to capture variations

automatically

• Test continuity and diodes

• Easy to read display with large digits and bright backlight

• Battery life approximately 400 hours

ULTIMATE FLEXIBILITY IN TOUGH

MEASUREMENT SITUATIONS

Be in two places at once

INCREASED SAFETY

Reduce arc ﬂash risk by keeping yourself out of

hazardous situations

MAKES HARD MEASUREMENTS EASY

• Read the display up to 10 meters (33 feet) away

• No more holding both the meter and the test

leads to make a measurement

• Ideal when the measurement point is separated

from controls

Summary of content (3 pages)

PAGE 1
TECHNICAL DATA Fluke 233 Remote Display Multimeter The Fluke 233 True-rms Remote Display Digital Multimeter allows you to be in two places at once.
PAGE 2
Specifications Accuracy specifications DC voltage Range 0.1 mV to 1000 V Accuracy 0.25 % + 2 AC voltage Range 0.1 mV to 1000 V Accuracy 1.0 % + 3 DC current Range 0.1 mA to 10 A Accuracy 1.0 % + 3 AC current Range 0.1 mA to 10 A Accuracy 1.5 % + 3 Resistance Range 0.1 Ω to 40 MΩ Counts 6,000 Capacitance 1,000 nF to 9,999 µF Frequency 0.1 Hz to 50.
PAGE 3
Ordering information 233 Remote Display Multimeter Included Test leads, Alligator clips, 80BK-A Temperature Probe User documentation AA batteries Optional accessories TPak Magnetic Hanging Kit i410 AC/DC Current Clamp 80PK-9 General Purpose Probe (Type K) 80AK-A Thermocouple Adapter C35 Soft Carry Case Fluke. Keeping your world up and running.® Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands For more information call: In the U.S.A.