User's Manual

345 Users Manual Supplement
5/13 1
Change #1
On page 15, under Voltage Measuring Input, replace the
first sentence with the following:
The maximum input voltage for over-voltage category CAT IV
may not exceed 600 V to earth ground.
Change #2
On page 25, under Balanced Three-Phase Power
Measurement Connection, replace:
Current is measured on one phase and the two voltages are
measured on the remaining phase.
With:
Current is measured on one phase and the phase-to-phase voltage
is measured on the remaining lines.
On page 55, remove the screen shot and replace with the
following:
Change #3
On page 2, under Warnings, add:
 Measure a known voltage to verify product operation.